How to fix there are currently no logon servers available

 

Error:

There are currently no logon servers available to service the logon request

The error message "There are currently no logon servers available to service the logon request" usually indicates that a client computer is unable to connect to a domain controller in order to authenticate a user account. Here are some potential causes and solutions for this issue:

1.Network connectivity issues:

Make sure that the client computer has a working network connection. connected to WIFi/LAN connection properly. Restart system  & check. and that it can communicate with the domain controller(s). Check the IP address settings and DNS settings to ensure that they are correct.

2.Network Reset:

Usually when this error come you will not able to login with domain ID. you need to login with last login user or buid-in Administrator account or LAPS password used in organization. Once you able to login try to reset network . you can try below two command:

netsh winsock reset
netsh int ip reset

3. DHCP server not available

Might be case that DHCP server not allocating IP to system . That case you may get APIPA-  IP 169.254.x.x. You need to check with Network people for this & get it fixed. You can try below command to IP release & renew.

ipconfig /release 
ipconfig /renew

4. Try to set manual/Static IP & DNS server entry to system. 

Below are the step to set Static IP for system/server:
1.Click on the Start button and select Settings.
2.Click on Network & Internet.
3.Click on Ethernet or Wi-Fi, depending on your network connection.
4.Click on Change adapter options.
5.Right-click on the network adapter you want to configure and select Properties.
6.Scroll down and select Internet Protocol Version 4 (TCP/IPv4) and then click on Properties.
7.Select "Use the following IP address" and enter the IP address you want to use. This should be an IP address that is within the same subnet as the other devices on your network.
8.Enter the Subnet mask and Default gateway information as provided by your network administrator or Internet Service Provider.
9.If needed, enter the DNS server information, which is also provided by your network administrator or Internet Service Provider. 10.Click OK to save the settings.
Once you have completed these steps, your computer should be configured to use the manual IP address you specified. Keep in mind that if you are on a network with DHCP enabled, your manual IP address configuration may not work properly, so be sure to verify with your network administrator that the IP address you are setting is available and not already in use.

5. W32Time:

Make sure NTP service-W32Time time on your DCs and clients match correctly.It must not differ more than by 5 mints.

6. Netlogon service on DC

Make sure Netlogon service running on DC.  restart the service on DC & dependent services.

7. Hostfile entry need to verify

Due to some wrong entry in hostfile entry. DNS server is not reachable. Check & delete entry accordingly.

 On my best practice, In this article highlighted the  area where you can check & troubleshoot for Error no logon server. Hope you get solution & fixed for this.